Solar Powered
Come with quick charging and long lasting battery.
Load and position in one solar-powered sensor, with no cables at the polished rod.
Come with quick charging and long lasting battery.
Eliminate the need for replacing cables.
Load and position sensing with one single device.
Minimal wiring required and U-shaped transmitter structure for easy installation
Proven to withstand harsh environment
Work with all the major pump controllers available in the market.



It measures polished rod load and position in one device. Together they give the surface dynamometer card that a pump-off controller uses to monitor and control a sucker rod pumping well.
By a built-in solar panel with a quick-charging, long-lasting battery. No power cable runs to the polished rod.
Yes. It works with all the major pump controllers on the market, with either mA or mV output. It also pairs with the ULT VFD rod pump controller.
Load cell cables at the polished rod are a common failure point. Wireless digital communication removes them, along with the alarms, shutdowns and cable replacements that cable failures cause.
It sits on the carrier bar of the pumping unit. The U-shaped transmitter structure and minimal wiring make installation quick.
The downhole pump is where a rod pumping system actually lifts fluid. This guide covers how its two valves work, every main part, how to read an API 11AX pump code, and how to estimate its output.
Read the guide Rod pump diagnostics guideHow to read a dynamometer cardA dynamometer card plots polished rod load against position for every stroke. Its shape shows what the downhole pump is doing. Here is how to read one and spot the common problems.
Read the guide